# MKT:@(#) 64700AX008  A.00.05 64700 SW UTIL                            01Mar94                      
#
#
# This is a template for the creation of the actual file which  specifies  the
# Hewlett Packard 64700 series emulators attached to this MSDOS PC.  This file
# should be modified and installed as:
#
#                     \HP64700\TABLES\64700TAB
#
# The "logical name" is the name the emulator is known by in the various  user
# interface  products that can control it.  It must be unique within the first
# 14 characters.
#
# The "processor type" is used by some  user  interfaces  to  search  for  any
# emulator supporting a specific processor.
#
# The "physical device" is the name of the comm port  that controls the serial
# channel  to  be  used  by the emulator.
#
# The remaining columns describe the device and the serial port  configuration
# that  correspond to the switch settings on the series 64700 emulator.  Eight
# bit characters are recommended.  Flow control is STRONGLY recommended.
#
# Lines beginning with '#' are ignored.  The information in each line must  be
# in  the  specified order, with one line for each series 64700 emulator.  Use
# blanks or tabs to separate each field.
#
#-------------+---------+--------------------+----+------+------+----+----+----
#             |         |                    |xpar| baud |parity|flow|stop|char
# logical name|processor|     physical       |mode| rate | ODD  |NONE|bits|size
#  (14 chars) |  type   |      device        |    |      | EVEN |ON  | 1  | 7
#             |         |                    |OFF |      | NONE |RTS | 2  | 8
#-------------+---------+--------------------+----+------+------+----+----+----
  emul_com1     unknown  COM1                 OFF  9600    NONE  ON    1    8
  emul_com2     unknown  COM2                 OFF  9600    NONE  ON    1    8
