#
#	$NetBSD: GENERIC,v 1.66.2.3 2000/10/04 08:24:26 itojun Exp $
#
# Generic atari
#
# This configuration file is for a multiple disk/multiple tape ATARI-TT/Falcon
# with network (through ppp or slip).

include "arch/atari/conf/std.atari"

#ident 		"GENERIC-$Revision: 1.66.2.3 $"

#
# Add support for about 16 users. This variable is used to size
# various kernel structures.
#
maxusers	16

#
# processors this kernel should support
#
options 	M68030		# support for 030
#options 	M68040		# support for 040
#options 	M68060		# support for 060

options 	HZ=64		# Set the clock-rate (48/64/96)

#
# X11R6 related options
#
options 	UCONSOLE	# Allow xconsole to work

# Standard system options
options 	INSECURE	# disable kernel security levels
#options 	NTP		# NTP phase/frequency locked loop

#
# Floating-point options
#
options 	FPU_EMULATE	# Support for MC68881/MC68882 emulator
#options 	FPSP		# 68040 Floatingpoint support

#
# Networking options
#
#options 	GATEWAY         # packet forwarding
options 	INET            # IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
options 	MROUTING        # IP multicast routing
#options 	NS              # XNS
#options 	NSIP            # XNS tunneling over IP
#options 	ISO,TPIP        # OSI
#options 	EON             # OSI tunneling over IP
#options 	CCITT,LLC,HDLC  # X.25
options 	NETATALK        # AppleTalk networking protocols
options 	PPP_BSDCOMP     # BSD-Compress compression support for PPP
options 	PPP_DEFLATE     # Deflate compression support for PPP
options 	PPP_FILTER      # Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS      # pfil(9) packet filter hooks
options 	IPFILTER_LOG    # ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block packages by default

# File systems
file-system 	FFS		# Berkeley fast file system
file-system 	MFS		# Memory based filesystem
file-system 	NFS		# Network File System client side code
file-system 	PROCFS		# Process filesystem
file-system 	KERNFS		# Kernel parameter filesystem
file-system 	FDESC		# /dev/fd
file-system 	NULLFS		# Loopback filesystem
file-system 	OVERLAY		# overlay filesystem
file-system 	MSDOSFS		# MSDOS filesystem
file-system 	CD9660		# ISO 9660 filesystem with Rock Ridge
file-system 	UNION		# union file system
file-system 	UMAPFS		# null file system (with uid & gid remapping)
file-system 	PORTAL		# portal file system
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system

# File system options
options 	QUOTA		# Disk quotas for local disks
#options 	FFS_EI		# FFS Endian Independant support
options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER	# Network File System server side code
#options 	EXT2FS_SYSTEM_FLAGS	# makes ext2fs file flags (append and
				# immutable) behave as system flags.

#
# Misc. debugging options
#
options 	PANICWAIT	# Require keystroke to dump/reboot
options 	DDB		# Kernel debugger
#options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
#options 	DEBUG		# expensive debugging checks/support

#
# Compatability options for various existing systems
#
options 	COMPAT_43	# 4.3 BSD compatible system calls (required)
options 	COMPAT_10	# Compatibility to NetBSD1.0
options 	COMPAT_11	# Compatibility to NetBSD1.1
options 	COMPAT_12	# Compatibility to NetBSD1.2
options 	COMPAT_13	# Compatibility to NetBSD1.3
options 	COMPAT_14	# Compatibility to NetBSD1.4
#options 	COMPAT_09	# has no meaning on the atari
#options 	COMPAT_SUNOS	# Support to run Sun-3 executables
#options 	COMPAT_SVR4	# Support to run SVR4 executables
#options 	TCP_COMPAT_42	# Disable UDP checksums (not needed)
#options 	COMPAT_LINUX	# Support to run Linux/m68k executables
#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)

#
# Support for System V IPC facilities.
#
options 	SYSVSHM			# System V shared memory
options 	SYSVMSG			# System V messages
options 	SYSVSEM			# System V semaphores

#
# Support for various kernel options
#
options 	KTRACE			# Add kernel tracing system call
options 	DIAGNOSTIC		# Add additional error checking code

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options 	PCIVERBOSE		# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP		# verbosely dump PCI config space
options 	SCSIVERBOSE		# human readable SCSI error messages

#
# Atari specific options
#
#options 	KFONT_8x8		# Use 8x8 font instead of 8x16
options 	ST_POOL_SIZE=22		# smallest that allows TT-HIGH
options 	TT_SCSI			# SCSI-support for TT
options 	FALCON_SCSI		# SCSI-support for Falcon
options 	TT_VIDEO		# Graphics support for TT
options 	FALCON_VIDEO		# Graphics support for FALCON
options 	STATCLOCK		# Separate {stat,prof}clock
options 	MEMORY_DISK_HOOKS	# Boot RAM-disk
options 	DISKLABEL_NBDA		# NetBSD disklabels (required)
options 	DISKLABEL_AHDI		# NetBSD/AHDI disklabels
options 	SERCONSOLE		# modem1 console support
options 	RELOC_KERNEL		# TT/Falcon: relocate kernel to TT-RAM

# Try linked commands on all targets
options 	TRY_SCSI_LINKED_COMMANDS=0x7f

#
# Build one kernel that can boot from any disk.
#
config		netbsd root on ? type ?

pseudo-device	mouse		1	# mouse
pseudo-device	view		2	# View (graphics mapping)
pseudo-device	sl			# Slip
pseudo-device	ppp			# ppp
pseudo-device	pty		64	# pseudo-terminals
pseudo-device	loop			# Loopback network
pseudo-device	vnd		3	# 3 pseudo disks (see vnconfig)
pseudo-device	bpfilter	2	# berkeley packet filters
pseudo-device	tun		2	# network tunnel
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	ccd		4	# concatenating disk driver
#pseudo-device	raid		4	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
pseudo-device	md		2	# Boot memory disk
pseudo-device	ipfilter		# IP filtering device
# rnd is EXPERIMENTAL
pseudo-device	rnd			# /dev/random and in-kernel generator

#
# The following sections describe various hardware options.
#
fd0	at fdc0 unit 0			# builtin floppy drive
fd1	at fdc0 unit 1			# external floppy drive
ser0	at mainbus0			# Serial support through 68901 (modem1)
zs0	at mainbus0			# Serial support through 8530
grfcc0	at grfbus0			# Frambuffer graphics driver
ite*	at grfcc0			# Frambuffer console
grfet0	at grfbus0			# Tseng graphics driver
ite*	at grfet0			# et4000/et6000/et6100 console
nvr0	at mainbus0			# nvram driver
lp0	at mainbus0			# centronics printer

# SCSI devices
sd* 	at scsibus? target ? lun ?	# SCSI disk drives
st* 	at scsibus? target ? lun ?	# SCSI tape drives
cd* 	at scsibus? target ? lun ?	# SCSI CD-ROM drives
ch* 	at scsibus? target ? lun ?	# SCSI autochangers
ss* 	at scsibus? target ? lun ?	# SCSI scanners
se* 	at scsibus? target ? lun ?	# SCSI ethernet
uk* 	at scsibus? target ? lun ?	# SCSI unknown

pcibus0	at mainbus0			# PCI-bus
pci0	at pcibus0
ahc*	at pci? dev ? function ?        # Adaptec [23]94x, aic78x0 SCSI
avmebus0 at mainbus0			# VME bus
vme0	at avmebus0
le0	at vme0	irq 5			# Lance ethernet (Riebl/PAM).
le0	at vme0 irq 4			# Lance ethernet (BVME410).
et0	at vme0				# Crazy Dots II

isabus0	at mainbus0			# ISA-bus
isa0	at isabus0
wdc0	at mainbus0			# IDE-bus
wd*	at wdc? drive ?			#    ... and drives
atapibus* at wdc? channel ?		# ATAPI-bus
cd*	at atapibus? drive ?		# ATAPI CD-ROM drives
sd*	at atapibus? drive ?		# ATAPI disk drives
